--Overheating protection:The hot air has overheat protection. If it is too hot, it will be powered off. It can continue to be used after a little cooling
--Widely used: Suitable for DIY pottery clay, shrink packaging heat gun. You can also blow heat shrinkable film, rubber stamps, etc., for a wide range of uses.
--The temperature rises rapidly: the hand is not hot, the temperature rises quickly, the temperature can be up to about 200 ° C, and the grip is comfortable
Description:
Name: heat handle
Power supply type: AC power supply Voltage: 220v power supply 300 W
Colors: White, Black
Material: Plastic
Size: about 225 X 55 X 50 mm/8.86 X 2.17 X 1.97 inches
Instructions:
1. Plug in the power supply and turn on the power transition. 2. Keep a distance of 3-5cm from the object and heat it at about 45 degrees until the object is completed. 3. Turn off the power and cool down.
during use and cannot be used continuously. The cooling is turned off every 40 seconds. Because the hot air has overheating protection
It cannot be used to melt tin wire.
Pacakge list:
1*heat handle
Note:
The new machine has a smell of smoke when it is turned on, and it will disappear after a few minutes after opening it. This is a normal phenomenon. Be sure to read the manual before using it.